The Definition of Hammer
The part of the gun that strikes either the firing pin or the round directly when the trigger is pulled then detonates the primer of the load and discharges the gun. Hammers may be external or internal. On a striker fired gun (a gun without a physical hammer) the firing pin is considered the hammer since it releases directly when the trigger is pulled.
19 Other Firearms Definitions You Need To Know
A handgun-style fully automatic or burst-mode firearm.
A machine pistol is not the same thing as a Submachine Gun
Although we have two eyes for depth perception and for spare parts, there is a natural tendency for one eye (the master eye) to take precedence over the other,
regardless of the relative visual acuity of each eye. It is a fortunate condition when the eye on the side of the shoulder where one is comfortable mounting a gun is also the dominant eye.
To test for eye dominance:
Pick out a small object several feet away.
With both eyes open, center your right index finger vertically over the object.
Close your right eye.
If your finger appears to jump to the right, you are right eye dominant.
Then open your right eye and close your left eye.
If your finger remains in position in front of the object, you have confirmed your right eye dominance.
Alternatively, if in the above test, upon closing your right eye your finger remains in position covering the object, you are left eye dominant.
If you close your left eye instead and your finger appears to jump to the left you have confirmed your left eye dominance.
Eye dominance problems can be treated with
1. A severely-cast, crossover stock to bring the dominant eye in line with the gun's line of sight,
2. A patch over the dominant eye, or just a small piece of frosty Scotch tape on shooting glasses intercepting the dominant eye's line of sight,
3. Fully or partially closing the dominant eye, or 4. Learning to shoot from the dominant-eye shoulder.
While less convenient, methods that retain the use of both eyes better preserve the ability to perceive depth in three-dimensional space, a great benefit in wingshooting.
Generally refers to a .32 calibre or smaller firearm.
A locking device, usially a clable with a padlock that you put on a firearm to render it unable to be fired buy running it through the magazine well and out the ejection port.
The point where the projectile from a firearm hits.
The part of a flintlock action that receives the blow of the flint-tipped hammer, which then yields tiny molten fragments of steel
,sparks, which fall into the flashpan, igniting the priming charge and thence, through the touchhole, the main charge.
The substance which imparts movement to the projectile in a firearm. In a firearm, usually powder. In an airgun the propellant is air or Co2
System of measurement for the internal bore diameter of a smooth-bore firearm based on the diameter of each of that
number of spherical lead balls whose total weight equals one pound.
The internal diameter of a 12 gauge shotgun barrel is therefore equal to the diameter of a lead
ball weighing 1/12 pound, which happens to be .729" (Or in British: Bore.) The Gauge/Bore system is also used, by convention, to describe the internal barrel diameter of large-bore,
19th century, English, single-shot and double-barrel rifles.
A firearm manufactured by someone who is not a regular maker of firearms.
As in Trapdoor buttplate or Trapdoor Pistol Grip Cap, one of these articles of furniture including a hinged plate,
covering a small compartment below in which may be stored several extra cartridges, sight bits, extra springs or pins, cleaning rod, etc.
A variety of pneumatic gun that propels projectiles by means of compressed air or other gas, in contrast to firearms, which use a propellant charge.
Both the rifle and pistol forms (air rifle and air pistol) typically propel metallic projectiles, either pellets, or BBs. Certain types of air guns, usually rifles, may also propel arrows.
The accumulation of unwanted material on solid surfaces. The fouling material can consist of either powder, lubrication residue, or bullet material such as lead or copper.
The action of an external hammer pinching or poking the web of the operator's
shooting hand between the thumb and fore-finger when the gun is fired.
A rib extension on a break-open gun, ending in a circular or semi-circular shape in plan (resembling the head of a doll),
mating into a similarly-shaped recess in the top of the receiver, designed to resist the tendency of
the barrels to pull away from the standing breech when firing.
Because an action's centerpoint of flexing when firing is at the base of the standing breech, not at the hingepin, a passive doll's
head extension makes an effective extra fastener, even without additional mechanical locks operated by the opening lever.
The size of the pellets in a shotgun shell.
An offset of a gun stock to the right, so
that the line of sight aligns comfortably with the right eye while the butt of the stock
rests comfortably on the right shoulder. Almost all right-handed shooters benefit from a
little castoff and most custom built guns are made this way. The only question is how
much. The castoff of a gun is about right when, with the gun comfortably mounted, the
front bead lines up with the center of the standing breech.
A stock offset to the left, for shooting from the left shoulder is said to be
Contrary to some people's belief, AR does NOT stand for Assault Rifle. The designation AR stands for the original designing company ArmaLite.
An AR is a firearm platform originally designed by ArmaLite and built by Colt,
an AR is a lightweight, intermediate cartridge magazine-fed, air-cooled rifle with a rotating lock bolt, actuated by direct impingement gas operation or long/short stroke piston operation.
It has been produced in many different versions, including numerous semi-automatic and selective fire variants.
It is manufactured with extensive use of aluminum alloys and synthetic materials.
Types of ARs include AR-15, AR-10 and AR-7.
Slang term for a firearm sound suppressor.